I installed one of the three springs on my ION curling iron, I am just not sure what spring it was.... but it works great!
Thanks!
Jenee I.
November 3, 2018
The spring (#1002) fits perfect for my iron. It is “Style Elements by Intertek”. Model number may be: JOL 55F-19 or 3122998.
Thanks,
Judy K.
November 3, 2018
Very easy installation! Pro Beauty Curling Iron PBIR1892. I used the 1" but got the thicker guage (spring #1002) than the factory OEM. My wife likes it better. Way cheaper than buying a new Curling Iron!
Robert N.
November 2, 2018
Shipment arrived quickly. Spring (#1002) was easy to install and works great! Glad that I saved money by purchasing a replacement spring instead of a new curling iron. It's a very old curling iron! Conair Infiniti Pro.
Thank you!
Brenda D.
November 2, 2018
The curling iron for which I recently replaced the spring was Hot Shot Tools Model SBS-510320. I have fixed other springs in the past but had difficulty finding them or the correct. I was delighted to find your page. It is very well organized and I was quickly able to find the correct spring (#1006) even thought I didn’t have the model number at that time. It is easy to replace, but you really have to have strong hands or three hands to accomplish it quickly.
Sincerely,
Bobbie M.
November 2, 2018
The spring (#1005) arrived and is now installed on a Conair Curling Iron. Not sure of the model # but the sizing process provided on your website was very helpful. I bought two just in case of any future needs with other curling irons around the house that our family uses.
Thank you!
Mark D.
November 1, 2018
All worked good, no problem with installation either, I don't know the brand or name of the iron :-( Spring # 1005
W. C.
November 1, 2018
It was very easy. Great response time too. Thank you will share with friends.
Jeannie S.
November 1, 2018
Replacement was easy; took about 5 minutes. The only information I could find is "BaByLiss Pro". This iron is 1 inch diameter. I think it quite likely that this spring (#1001) will work for many 1 inch Irons.
Gerald R.
November 1, 2018
It was for my girlfriends curling iron unsure of the model I just matched it with the sizing chart you provided on your website and it swapped out perfectly. Works great from what I hear. I will have to talk to her on the model and get back to you.
Kind Regards,
Sam S.
October 1, 2018
Good news; the springs fit! So I have two different Babyliss curling irons — and the models are: BABC125SC (took spring 1007) and model BP125S (took spring 1009).
Melanie R.
September 15, 2018
The spring (#1002) I ordered fits the Helen of Troy (Hot Shot Tools) iron, model #1008 and it was no problem to install the spring. Have done it for years!
Thanks for being out there for this instead of having to throw the curling iron away.
Pamela L.
September 11, 2018
My curling iron is a Hot-Shot-Tools, model 1006. My husband said the spring was very easy to replace. (Spring # 1006)
Thanks,
Joyce D.
September 6, 2018
I have a Hot Shots Tools by Helen of Troy model # 1003 model I first ordered spring 1003 at 1 1/2 inches and it was too big, so I had to order the 1002 at 1 inch. It was easy to install and fits great.
Thanks,
Kim S.
August 4, 2018
I'd purchased several springs (#1002) in the past for my Hot Tools curling iron, to have on hand. As soon as I replaced the last one, I immediately ordered more. They're easy to install & fit perfectly.
So thanks again!
Mitchell P.
July 6, 2018
Thank you for your speedy delivery! It is very much appreciated.
Sharon W.
March 21, 2018
I installed spring # 1002 into my Hot Tools curling iron, model #1181. It works perfectly, and i will definitely recommend!
Thank you,
Becka P.
February 8, 2018
The spring (#1001) fit perfectly and was easy to install. I have a Paul Mitchell ProTools Express Ion Curl 1.0 Model C10NA.
Thank you very much for selling the springs! I’ll be happy to spread the word!
Jennifer G
February 6, 2018
Works great. Thanks for quick delivery. Paul Mitchell C10NA - Thinner spring # 1005.
Dr. Peter F.
January 28, 2018
Just getting around to fixing my favorite curling iron. The 1005 spring worked perfect on my Paul Mitchell Model C10NA. Looks like the 1001 will work as well.
Thanks for the great customer service. Will definitely pass your company's name on to family and friends.
Karen R.
January 27, 2018
My husband installed curling iron spring #1009 in my Helen of Troy curling iron model # 1538 in less than 5 minutes. It's now works like new.
Thanks for a great product that was shipped quickly and arrived in great condition!
Sherrie H.
January 27, 2018
I am glad to help out. These springs # 1006 were ordered for a Hot Tools model 1110 curling iron. They fit perfectly and were simple to install. I’m glad that I found your website. I will tell all my friends and family about this.
Thanks,
Bruce G.
January 26, 2018
The springs (#1006) you sent worked just fine on my T-3 curling iron Model 83975. Delivery was great. The iron itself was a job to take apart and needed special tools. So be aware.
Thanks again for the good service.
Susan T.
January 24, 2018
I was able to install the spring #1009 within a few minutes and it works great! Installation was very easy and instructions on measuring the spring was spot on. Great solution and very cost effective to fix instead of purchasing a new curling iron. The curling iron is a Conair Infiniti model # CD108FP.
Thanks,
Maureen S.
January 23, 2018
I have an extended barrel Ion curling iron, probably 1 3/4” or 2”. I cannot find a model number anywhere. The spring that broke & was taken out of it did not open up in an angle like the ones my husband ordered. He indicated the replacements would not fit last night. However, I decided to try for myself - stubborn and independent woman, I know. I had to squeeze the ends together and rely on the black metal cover to hold the ends tight to the barrel. Once I did that, it seems to work fine! (I am hoping the black spring cover is sturdy metal vs plastic which may pop under pressure.) See attached pics below. (Spring # 1007)
Deborah N.
January 20, 2018
Very easy to install! Very happy I found your website!!!
Helen of Troy professional Gold series Model 1003 - Spring # 1002
Beth O.
January 19, 2018
I have a Hot Tools, 3/4”, model # 1101. I ordered a #1002 for a 1”. It worked great!! I am beyond excited to have my curling iron working again. You have to take the clamp off to replace the spring, but it was very simple.
Thank you so much!
Sherie B.
January 15, 2018
Installation went well. On line video well done and helpful. Make is SRC. No model number visible anywhere. Thanks for providing these springs.
Spring # 1006 used
Jim R.
January 13, 2018
Installation very quick and easy for my Helen of Troy curling iron model #1007.
D. D.
January 12, 2018
The spring replacement is very simple. You only have to remove the stand then two screws. Next you remove the spring holder screw and remove the old spring. Replace the spring and screws and the stand. Takes 5-10 minutes.
Hot Tools Professional - Model number 1181 - Type UT1181JD Spring # 1002
Michael B.
January 11, 2018
The spring (#1002) was used to repair my wife's curing iron: Helen of Troy Professional model 1003. Installation was simple and it seems to work fine.
Thanks!
Dennis S.
January 8, 2018
The springs I bought #1002 for 1” curling iron, worked perfectly on my HELEN OF TROY Curling iron Model 1005.
